IBR / NON IBR
ORIFICE PLATE
An Orifice plate is a most popular flow element. Flamingo orifice plates are precisely manufactured from the finest materia ls with close tolerance to match ISO 5167, BS 1042 and API 2530 &AGA report 3. Mountings between flanges or carrier ring (s) are available.
| Line size | : | 15 - 1500 mm (½" - 60" NB) |
| Type | : | Concentric square edge, Quarter of circle , Conical entrance, Segmental, Eccentric |
| Accuracy | : | ± 1% |
| Materials | : | AISI 316, AISI 304, Hastelloy C, Monel etc. |
Orifice Plate Assembly
An Orifice plate assembly provides maximum economy with minimum maintenance. It consists of orifice plate , studs , nuts , jack bolts & gaskets. Flanges are according to ANSI , DIN, JIS standards. Type of orifice flanges includes Welds neck , Slip on, RTJ and T & G.
| Line size | : | 15-1500mm (½"-60" NB) |
| Type | : | Flange tap , Corner tap , Radius tap (D & D/2 TAP) |
| Accuracy | : | ±1 % |
| Materials | : | A'l 05,A182 - F316,A 182 - F304.A182 - F5,A182 - F11,A182 - F22 |
FLOW NOZZLE
A nozzle is a curved convergent entry leading to a short cylindrical throat without a discharge cone. It is generally selected for steam (vapour) flows at high velocities of flowing fluid . It is more stable at higher temperature & velocities than an orifice, as it is rigid .The types are made according to the entrance.
| Line size | : | Long radius nozzle - 50 - 630mm (2" - 24" NB)' ISA 1932 - 50 - 500mm (2" - 20" NB) |
| Type | : | Long radius nozzle, ISA 1932 |
| Pressure Tap | : | Long radius nozzle - Radius tap (D &D/2 tap)only, ISA 1932 - Corner tap only |
| Accuracy | : | ± 1% |
| Materials | : | AISI 316 ,AISI 321 |
VENTURI TUBE
A Venturi tube has a conical convergent entry followed by a cylindrical throat &a conical divergent outlet. Manufactured to ISO 5167, BS 1042 standards, it substantially reduces permanent pressure loss. The types are made according to the manufacturing methods of the intern al surface of the entrance cone & profile at the intersection of the entrance cone & throat.
| Line size | : | Type A - 100 - 800mm (4" - 32" NB) Type B - 50-250mm (2"-10" NB) Type C - 200-1200mm (8" - 48" NB) |
| Type | : | Type A - Cast Convergent section , Type B - Machined convergent section , Type C - Rough Welded sheet - iron convergent section. |
| Accuracy | : | TypeA - ±0.7%,Type B - ± 1.0 % TypeC - ± 1.5% |
INTEGRAL ORIFICE PLATE ASSEMBLY
An Integral orifice plate assembly is integrally mounted with the measuring instrument. It is a compact & complete flow meter device without need of impluse piping. The assembly includes integral orifice plate, bodies, studs, nuts & gaskets. Bodies with socket-weld or threaded end connections are available. IOPA with upstream &downstream piping with flanged ends are also available.
| Line size | : | 15 - 40 mm (½" - 1Y2 " NB |
| Accuracy | : | ± 2% |
| Material of plate | : | AISI316,AISI 304, Hastelloy C, Monel , Other on request |
| Material of body | : | A351- CF8M,A216 -WCB ,AI05,A I82 - F 316 |
| Material of gasket | : | P.T. F.E. |
Pressure Reducing & Desuper Heating System (PROS)
PROS is used to reduce the pressure of steam as well as temperature. PRDS is used for Bypass for turbine & L.P steam to Process.
| Line size | : | 15 - 1200 mm (½"- 48 " NB) |
| Accuracy | : | Pneumatic control ±1% Electronic Control ±0:5% |
| Material | : | Carbon Steel / Alloy Steel | Make of Valve | : | Pneucon / Forbes Arca / RK / Equivalent |
Steam Header & Piping
We Manufacturer Steam Header & Piping on trunkey basis. At our works as well as on site all over India . We have 1st class as well as special class Licence under IBR 1950
| Line size | : | 15-1 200 mm (½"- 48 " NB) | Material | : | Carbon Steel /Alloy Steel/Stainless Steel | Category | : | With Material basis as well as Labour basis |
CONDENSING POT
| Types | : | Cap End / Flat End) | Size | : | 2", 3" &4" NB | Material | : | Carbon Steel / Alloy Steel / Stainless Steel |
SYPHON
| Types | : | Pig Tail / U Type | Size | : | 3/8" & 1/2" NB | Material | : | Carbon Steel / Alloy Steel / Stainless Steel |
MANIFOLD
| Types | : | Flat / T-Type / H-Type | Size | : | 2 Way / 3Way / 5 Way | Material | : | Carbon Steel 1Stainless Steel |
FLANGES
| Standards | : | B 16.36, B 16.5, B 16.47, BS 10, DIN | Types | : | Orifice / Pipe Flanges (Plate & Forged) (Weldneck, Slipon, Blind, Socket Weld, RTJ Flange) |
Size | : | ½" NB To 48" NB | Class | : | 150#, 300# , 600#, 900#, 1500# & 2500#. | Material | : | Carbon Steel / Alloy Steel / Stainless Steel |